HIGH POWER SUBWOOFER CORE 10218SA
CORE 10218SA ACTIVE 18″ FLYABLE HIGH POWER SUBWOOFER
The CORE 10218SA is an 18” active subwoofer system. The CORE 10218SA features a one channel, Class D amplifier that is specifically designed to power its corresponding passive cabinet, the CORE 10218SP, but can be used in a full active line array setup if required or preferred.
The CORE 10218SA is compact, lightweight and can be flown or ground-stacked and possesses high output capability with low-frequency extension.
It contains a single Ultra-long 18” / 4” V.C. front-loaded woofer and the rear of the low-frequency driver is reflex loaded to extend the low-frequency output to below the natural cut off point.
The proprietary rigging system of the CORE10218SA is directly compatible with the CORE 102A, CORE 102P, and CORE 10218SP. The CORE 10218SA also features the latest digital signal processor and the NUCLEUS FIR by Sound Barrier™ Loudspeaker Management Software.
• 3000 WATT Peak Power – 1500W RMS
• 131dB MAX SPL
• 32Hz-30Hz frequency response
• 1 x 18″ Woofer, 4″ Voice Coil
• DSP controlled Input section with selectable presets
• Tour grade safe and solid variable mechanics
• Designed to complement the CORE102
• Designed to power CORE10218SP
• Solid Birchwood enclosure structurally wooden reinforced
Every CORE active unit functions with the NUCLEUS FIR by Sound Barrier™ Loudspeaker Management Software, providing all of the features and flexibility required to drive and align the CORE series systems. Incorporating traditional IIR X-over and parametric EQ functions in conjunction with revolutionary FIR modes, NUCLEUS FIR by Sound Barrier™ Loudspeaker Management Software is one of the most flexible, advanced yet user-friendly loudspeaker management software in the world. The software and integrated applications transform the CORE series system from an active line array system into a transcendent and revolutionary piece of audio technology no professional should be without
POWERFUL AMP
Sound Barrier”s Class-D power amplifier technology packs huge performance operating with high efficiency into a lightweight solution. CORE10281SA amplifiers deliver an ultra-fast attack, realistic transient response, and impressive audio performance. More than enough to power the CORE 10218SA and an additional CORE10218SP. The amplifier is constructed with a solid machined aluminum structure which not only stabilizes the amplifier during transportation but also assists in heat dissipation. To ensure the integrity of the amplifier components in high-temperature settings, additional cooling fans have been integrated into the design.
NUCLEUS FIR by Sound Barrier™ Loudspeaker Management Software features the FIR Phase Wizard, a step by step FIR system phase correction mode that maximizes the performance of the CORE series for efficiency and potency by phase correcting and adapting the system to its surrounding environment/ venue. The procedure only requires an ASIO box (audio interface), measurement microphone and CORE series line array system. The software automatically detects the ASIO box and measurement microphone when connected to the user’s PC.
FIR PHASE CORRECTION
Once the PC is connected to the CORE series system (via a RS485), the FIR Phase Wizard step by step instructions will guide user from IR measurement to FIR calculation. The Phase Wizard automatically processes measures and analyzes the test signal produced by the CORE system to allow for the systems environmental phase correction. Once the system’s environmental phase correction is complete, users can save the data onto their PC as an FIR Phase Wizard File and / or load onto the CORE series system cabinets. The FIR Wizard software and integrated applications transforms the CORE series sound reinforcement system from an active line array system into a transcendent and revolutionary piece of audio technology.
EASY AS 1 – 2 – 3
THINKING OUTSIDE THE BOX.
The CORE system amplifiers deliver an ultra-fast attack, realistic transient response, and impressive audio performance that is more than enough to power a CORE active array module and an additional CORE passive array module. The amp is constructed with a solid machined aluminum structure, which not only stabilizes the amplifier during transportation but also assists in heat dissipation. To ensure the integrity of the amplifier”s components in high-temperature settings, additional cooling fans have been integrated into the design.
| Acoustic Specifications
|
FREQUENCY RESPONSE:
32Hz-300Hz |
MAX SPL: 131 DB | |
| Transducers
|
LOW FREQUENCY:
1 x 18 INCH, 4-INCH VOICE COIL, NEODYMIUM MAGNET |
||
| Input / Output Section
|
INPUT SIGNAL:
XLR NUCLEUS FIR RJ45 ETHERNET |
OUTPUT CONNECTORS: XLR LOOPNUCLEUS FIR RJ45 ETHERNETNEUTRIK® SPEAKON NL4 | |
| Processor Section | CROSSOVER FREQUENCIES:
30Hz, 96Hz -24dB / OCT PROTECTION: OVER-HEAT, CLIP / LIMITER WITH GAIN REDUCTION NUCLEUS FIR: YES |
CONTROLS: INPUT GAIN8 DSP PRESETS | |
| Power Section | TOTAl POWER HANDLING:
3000W PEAK, 1500W RMSOPERATIONAL VOLTAGE:UNIVERSAL MAINS, 85-268V |
COOLING:
CONVECTION AND FAN VENT
CONNECTIONS: POWERCON IN / OUT |
|
| Standard Compliance | CE MARKING:
YES FCC MARKING: YES |
UL MARKING:
YES
|
|
| Construction | COLOR:
BLACK POLYURETHANE PAINT HANDLES: FOUR SIDE CABINET MATERIAL: BIRCH PLYWOOD |
RIGGING:
FAST INTEGRAL RIGGINGMAGNETIC PINSPOLE-MOUNT SOCKET
GRILLE: STEEL WITH ACOUSTIC FOAM ACCESSORIES: AMPLIFIER RAIN COVER |
|
| Dimensions | WIDTH:
28.7 INCH / 730 mm DEPTH: 26.8 INCH / 680 mm HEIGHT: 21.3 INCH / 540 mm |
WEIGHT: 150 LB / 68.2 KG | |
