CLASS PCS POWER AMPLIFIER PCS 2500
The PCS Series is a complete line of high performance amplifiers that offers a variety of different power sizes & types, including Class H and Class TD for a variety of applications, including but not limited to permanent installs, cinema and tour sound.
The PCS series easily handles 2 Ohm loads and function perfectly in Stereo, Bridged and Parallel loads. All PCS series amps are protected against shorted, open or mismatched loads; overloaded power supplies, excessive heat; Subsonic and Ultra Sonic phenomena.
They also protect loudspeakers from input/output DC transients and soft starts. It rugged construction and useful features including Input sensitivity switch, compressor switch and mode selector has made the PCS series a staple of the Sound Barrier for almost two decades.
• Handles 2 Ohm loads
• Function Indicators and short-circuit protection
• Class H Circuitry for ultimate reliability and efficiency
• Balanced XLR inputs and Combination Jacks per channel
• LED indicators for signal, clip, and protect for each channel;
• Parallel & Bridge Mode indicators
• Power & Level indicators.
• Precision Rotary level controls and power switch
| Acoustic Specifications
|
CHANNELS: 2
FREQUENCY RESPONSE: ±0.25dB FROM 15Hz-25kHz INTERMODULATION DISTORTION: 60Hz & 7kHz @ 4:1; LESS THAN 0.04% TOTAL HARMONIC DISTORTION (THD): <0.03% DAMPING FACTOR: GREATER THAN 400:1 SLEW RATE (INPUT FLITER LIMITED): 40V / us INPUT IMPEDANCE: 10K OHM BALANCED TO GROUND INPUT SENSITIVITY: 0.77V-1.0V-1.44V SELECTABLE |
AMPLIFIER TYPE: CLASS H
POWER OUTPUT PER CH. (@ 2Ω): 1350W
POWER OUTPUT PER CH. (@ 4Ω): 1050W
POWER OUTPUT PER CH. (@ 8Ω): 600
POWER OUTPUT BRIDGED (@ 4Ω): 2300W POWER OUTPUT BRIDGED (@ 8Ω): 1750W
|
| Input / Output Section
|
NPUT CONNECTORS:
2 x XLR BALANCED 2 x COMBINATION (XLR / 14″)
|
OUTPUT CONNECTORS:
2 x NL4 2 x BINDING POST
|
| Controls | FRONT PANEL:
2 x ROTARY CHANNEL LEVEL POWER SWITCH
|
REAR PANEL:
COMPRESSOR SWITCH INPUT SENSITIVITY SWITCH GROUND LIFT SWITCH MODE SELECTOR SWITCH CIRCUIT BREAKER
|
| Protections | COOLING:
INTERNAL HEAT SINKS DUAL VARIABLE SPEED FANS
FUSES: YES
SHORT CIRCUIT: YES OPEN / MISMATCHED LOADS: YES POWER SUPPLY OVERLOAD: YES
|
EXCESSIVE TEMPERATURE: YES
SUBSONIC PHENOMENA: YES
ULTRA SONIC PHENOMENA: YES
DC TRANSIENTS: YES
SOFT STARTS: YES
|
| Power Requirement | OPERATING VOLTAGE:
115V/60HZ 220V/50HZ (AVAILABLE UPON REQUEST)
|
POWER CONSUMPTION:
—– |
| Construction | CASE MATERIAL: METAL
HANDLES: TWO
COLOR: BLACK
|
RACKMOUNTING: 19″, 2U
FEET: ——
|
| Standard Compliance |
CE MARKING: YES |
|
| Dimensions | WIDTH: 19 INCH / 482 mm
DEPTH: 17.7 INCH / 450 mm HEIGHT: 3.5 INCH / 88 mm
|
WEIGHT: 51 LB / 23 KG |
| Voltios | 115-220, 220 |
|---|
